Optimized dual-function varistor-capacitor ceramics of core-shell structured xBi2/3Cu3Ti4O12/(1-x)CaCu3Ti4O12 composites

xBi_2/3Cu₃Ti₄O₁₂/(1-x)CaCu₃Ti₄O₁₂ composites were prepared by traditional solid-state reaction method. Extremely high nonlinear coefficient of 25 and breakdown field of 18.92 kV·cm⁻¹ were obtained in small current range of 0.1−1 mA·cm^-2. In addition, reduced dielectric loss of 0.055 was achieved with high dielectric constant of 1369. Optimized nonlinear and dielectric properties were integrated to make the composites a promising dual-function varistor-capacitor candidate. Microstructure analysis discovered two areas with various Bi/Ca ratio, designated as Bi-H and Bi-L respectively. It was found that the maximum ratio of Bi-H/Bi-L heterogeneous interface corresponded to optimized nonlinear and dielectric performance, which was associated with elevated potential barrier height and huge grain boundary resistance. Combined with relaxation analysis, a core-shell structure was proposed to elaborate microstructure evolution in xBi_2/3Cu₃Ti₄O₁₂/(1-x)CaCu₃Ti₄O₁₂ composite. According to the core-shell model, variation of heterogeneous interface was illustrated on how to influence nonlinear properties, which was well fitted to experimental results.     

单片机与接口技术项目化教学改革的实践与探索

As a comprehensive electrical and electronic course, Single Chip Microcomputer and Interface Technology is usually com- bined with automation technology, applied electronic technology, communication technology, etc., so that students can master the professional theory and application practice of single chip microcomputer. In the course teaching, teachers mainly focus on the knowledge points of single chip microcomputer system design, application programming, installation and debugging, select suitable interface circuit, application program, and organize and design the integrated circuit system and logic function of single chip micro- computer, so as to help students complete the resource allocation and function realization of different single chip microcomputer project design.     

基于Android平台利用表格布局制作简易计算器界面

Android程序设计中,有6大布局方法。文章重点论述了基于Android平台利用表格布局来制作一个简易的计算器界面,涉及详细的操作步骤,对计算器界面进行有效美化和优化,并做出总结。     

三元复合驱采出水处理研究进展

随着三元复合驱采油技术在油田的广泛应用，三元复合驱采出水产量不断增加。三元复合驱采出水水质复杂，具有矿化度高、黏度大、含油乳化程度高、小油滴含量高、油水分离困难等特点，对油田生产和环境的影响日益严重。因此，开展三元复合驱采出水高效处理方法的研究成为一项重要的任务。本文分析了影响三元复合驱采出水油水分离特性的各种因素，介绍了目前国内应用于三元采出水处理的先进技术，如膜分离法、气浮选分离法、高级氧化法、微生物法等，阐述了这些处理技术的优势及存在的问题，重点介绍了气浮选分离法和微生物法在三元采出水处理中的应用情况，并对大庆油田三元复合驱采出水现场处理工艺进行了介绍，最后对今后的研究工作提出了一些展望。     

PEO对固态锂电池正极/电解质界面的改性

在固态锂电池正极/氧化物电解质界面处引入聚氧化乙烯(PEO)缓冲层以改善固体接触。首先,用热压烧结法制备了密度为5.25 g·cm-3、锂离子电导率为8.33×10-4S·cm-4的Li6.4La3Zr1.4Ta0.6O12(LLZTO)固体电解质。其次,配制了PEO-LiTFSI-LLZTO缓冲层和LiFePO4复合正极浆料,用匀胶机旋涂法将PEO缓冲层和复合正极浆料依次涂覆在电解质表面,加热加压后显著改善界面接触,测得60℃下正极界面电阻值为509Ω·cm2。测试对称电池充/放电曲线证明界面稳定性良好,电池首次循环放电容量145.8 mAh·g-1,库伦效率大于97%。     

低速冲击下的界面响应和磨损行为*

为探究低速冲击下界面响应与磨损行为之间的联系，开展多周次的低速冲击磨损实验；通过分析冲击过程中的接触力峰值、接触时长、接触力冲量、动能耗散等，研究冲击速度对接触界面的力学响应的影响；通过对冲击磨痕的磨损轮廓和形貌、磨损体积的检测分析，以及对磨痕区域元素组分变化的测试，研究冲击速度对接触界面磨损损伤行为的影响。结果表明：冲击速度的增加会导致接触界面在更短的时间内受到更强烈的力学作用；能量吸收率对冲击速度的变化不敏感，但冲击速度的提高会导致单位能量造成的磨损损伤逐渐降低；冲击磨痕可分为以塑性变形和以剥层磨损为主要损伤形式的2种区域；磨损区内经历了严重的摩擦氧化，并随着冲击速度的增加发生冲击副材料转移。因此，冲击速度越高，接触界面间的摩擦越剧烈，形成的表面氧化层避免了冲击副与基底材料的直接接触，延缓了磨损损伤的进一步发展。     

Effect of the particle size ratio on macro- and mesoscopic shear characteristics of the geogrid-reinforced rubber and sand mixture interface

As a new type of material for civil engineering projects, the rubber and sand mixture is widely used in roadbed fillers, offering environmental benefits over traditional tyre disposal methods. This study uses a large-scale direct shear apparatus to examine the interface shear properties of the geogrid-reinforced rubber and sand mixture, considering different particle size ratios (r), rubber contents, and normal stresses. Based on indoor tests, direct shear models of the mixture with different values of r are established in PFC^3D, revealing the meso-mechanical mechanism of the mixture in the direct shear process. The results show that when r is greater than 1, incorporating a certain amount of rubber particles can increase the shear strength of the mixture. The r values of 15.78, 7.63, and 3.98 correspond to an optimal rubber content of 30%, 10%, and 20%, respectively. When r is less than 1, mixing rubber particles can only reduce the shear strength of the mixture. When the rubber content is low, the smaller the value of r, the greater is the thickness of the shear band. Furthermore, the normal and tangential contact forces are greater. The fabric anisotropy evolution law of the mixture is consistent with the change in the contact force distribution.